Fine Grinding Hammer Mill

Hammer mill can crush various granular materials, such as corn, sorghum, wheat, beans, broken cakes, Chinese herbal medicine and various spices. It can efficiently grind aquatic feed raw materials such as fish meal and shrimp meal into fine particles, and can also grind pet food raw materials such as meat, bone meal and grain into a fine consistency. It is specially designed for fibrous raw materials, high moisture, oily raw materials and fine grinding materials.

Fine grinding hammer mill is widely used in aquatic feed production, pet food production, food processing, Chinese herbal medicine and other industries.

Since the power consumption of the grinder accounts for about 30-40% of the production energy consumption of the entire feed plant, the improvement of the efficiency of the feed grinder may directly reduce the power consumption per ton of material in the entire feed plant. Therefore, it will bring huge economic benefits to the enterprise.

Hammer mill can crush various granular materials, such as corn, sorghum, wheat, beans, broken cakes, Chinese herbal medicine and various spices. It can efficiently grind aquatic feed raw materials such as fish meal and shrimp meal into fine particles, and can also grind pet food raw materials such as meat, bone meal and grain into a fine consistency. It is specially designed for fibrous raw materials, high moisture, oily raw materials and fine grinding materials.

Fine grinding hammer mill is widely used in aquatic feed production, pet food production, food processing, Chinese herbal medicine and other industries.

Since the power consumption of the grinder accounts for about 30-40% of the production energy consumption of the entire feed plant, the improvement of the efficiency of the feed grinder may directly reduce the power consumption per ton of material in the entire feed plant. Therefore, it will bring huge economic benefits to the enterprise.

1. The grinding chamber is of tear circle shape, effectively eliminating the circular flow in the grinding process and getting higher capacity;

2. The bottom of grinding chamber is fitted with U-shape double grinding structure, further improving the capacity with evener particle size;

3. All of our rotors pass an accurate dynamic balancing test, resulting in low noise and smooth running.

4. Both coarse and fine grinding can be completed by adjusting the distance between the beater and the screen;

5. New type S-shape coupling directly connecting driving results in big offset travel and effectively avoid the heat from the bearing;

6. Beater blade edge is vacuum-welded by special alloy steel, resulting in long service life;

7. The imported components are used for key parts, resulting in long service life and low maintenance cost;

8. The moving full-wide operation door facilitates maintenance and replacing of beater;

9. It is widely used in various feed mills, oil plants, alcohol plants, citric acid plants, etc.

Hammer mills are widely used in various industries for grinding and crushing different materials. They operate on the principle of impact, where the rotor rotates at high speed and the hammers attached to it strike the material, causing it to be crushed into smaller particles. The crushed material then passes through a screen or grates at the bottom of the machine, allowing the desired particle size to pass through.

Hammer mills are composed of various beating rollers that rotate at high speed in the grinding chamber. Raw materials are usually fed from the feed port and then immediately fall into the crushing chamber, where they are crushed and compressed by the beatings. Due to the speed and number of agitators, the material can be crushed into fine powder in a short time. You can adjust the gap between the baler and the screen to get sawdust of different sizes.

• The water drop crushing chamber design and “W” type secondary crushing structure are adopted to increase the output by 25%;
• The fully optimized hammer row and adjustable hammer screen gap realize the conversion between ordinary crushing and fine crushing;
• The operating door is designed to be fully open, which is more convenient for maintenance and operation, reduces the labor intensity of operators and improves production efficiency;
• Each rotor undergoes strict dynamic balancing tests and inspections to ensure the smooth operation of the hammer mill, reduce the wear of bearings, hammer frame plates and other components, reduce the maintenance of feed mills, and improve the productivity of hammer mills and the service life of feed mills;
• This series of feed mills are widely used in large and medium-sized feed mills to produce high-grade feed and aquatic feed.