Features and uses of wood comprehensive crusher

The comprehensive wood crusher can process a wide range of raw materials, such as various small-diameter materials, board skins, laths, log cores, building templates, etc., as well as various non-wood raw materials such as various bulk straws, cottonwood, reeds, etc., with a wide range of applications. This machine adopts chain plate intelligent feeding, which can automatically adjust the feeding speed according to the load of the main motor. Make the machine run at full load to avoid no-load operation, make the feeding smoother, and greatly improve the production capacity. It is an ideal equipment for biomass power plants.

1. The finished material from the comprehensive wood crusher is about the size of a matchstick. Due to the large raw materials, thickened screens (14MM) are used, and the screen holes can only process 22mm apertures, so the finished material is a bit large, which belongs to rough crushing.

2. The hourly output is about 3-5 tons, which is widely used in waste template processing plants, bamboo plywood processing plants, artificial board plants, composite board plants, power plant boiler raw material combustion, etc. and individual wood processing plants.

3. The wood crusher can also crush wood into pieces of about 5 to 8 cm in size. It uses all-steel flying knives or Yuanbao knife hammers. This equipment is suitable for a wide range of raw materials and has a high output. It can produce about 10 to 15 tons per hour. The processed templates are used as raw materials for biomass power plants.

1. The crusher crushes and processes plant materials, which are lower in hardness than stone materials. However, for the crusher, the hardness of different types of plants is different, and the degree of influence on the blades of the crusher is also different.

2. The overall method of judging the grinding cycle of the blade of the crusher is the same. It is very beneficial to use the naked eye to check frequently. You can check whether the blade needs to be polished in the previous period. If the blade is used normally, it can be polished once every half a month.

3. The second method to determine the grinding cycle of the blade is to use the processed materials to determine whether the blade needs to be polished. We can store and retrieve some of the quality-verified materials processed by the equipment as samples. If the equipment has a fineness lower than the sample in the next use time, it means that the blade needs to be polished.

4. The third method of comprehensive crusher is a different method of specifying the blade grinding cycle, that is, processing different materials. These different materials are also plant materials, but they are relatively high in hardness, so there is no need to check the wear of the blade or to check the fineness of the processed materials. Fortunately, it is polished once every five days, so that the quality of the finished materials produced by the comprehensive crusher equipment when processing materials with relatively high hardness is relatively high.

Nailed wood
It can handle building formwork, wooden pallets, nailed boards, etc. Metal nails can be automatically separated during the crushing process to avoid equipment damage.

Large-volume wood waste
Including large-size wood such as stumps, trunks, roots (up to 1.5 meters in diameter), logs, etc.

Construction and decoration waste
Such as waste formwork, door and window frames, demolition waste wood, furniture waste, etc.

Forestry and garden waste
Trees, twigs, bamboo, straw, reeds, etc. are suitable for the treatment of waste after pruning in gardening.

Other non-wood materials
Some models can be extended to the coarse crushing of biomass raw materials such as sugarcane bagasse and cottonwood.

Biomass energy production
The crushed materials can be used as fuel for biomass power plants, raw materials for biomass pellets, or for the production of machine-made charcoal and organic fertilizer.

Artificial board and papermaking industry
Provide primary raw materials for artificial boards (such as particleboard, fiberboard) and papermaking.

Construction and environmental protection engineering
Treat waste formwork and demolition waste at construction sites, reduce landfill, and realize resource recycling.

Landscaping
The crushed wood chips can be used as soil cover or compost raw materials to promote organic matter circulation.

Mobile scene operation
Diesel-powered or motor-driven mobile models support scenes without fixed power supply such as the wild and forest farms