Comprehensive Wood Crusher : The Ultimate Guide

Comprehensive wood crusher, also called composite wood crusher, building template crusher, this equipment mainly processes various comprehensive wood materials such as some waste building templates, waste wooden pallets, waste wooden furniture, waste wood branches, etc., especially for the crushing of waste wooden building templates used in the construction industry. After crushing various templates with nails and cement, the wood and nails can be fully separated, which is an ideal choice for crushing iron-containing wood boards.

The wood comprehensive crusher breaks the traditional process structure mode, uses the principle of hammer hammering, and adopts a crushing mechanism to prevent the presence of nails on bamboo plywood and cargo pallets from affecting the equipment. Thickened screens are used, and the processed finished materials are coarsely broken. The processed finished products are used as raw materials for combustion in biomass power plants. The wood crusher can also be crushed into sizes of about 5 to 8 cm. It uses all-steel flying knives or Yuanbao knife hammers. This equipment is suitable for a wide range of raw materials and has high output, which can produce about 10 to 15 tons per hour.

Wide applicability: The wood comprehensive crusher can handle a variety of raw materials, including wood with nails, wooden pallets, waste templates on construction sites, branches, wood, etc., and can even handle non-wood raw materials such as straw and reeds, etc., with a very wide range of applications.

Efficient production capacity: The equipment uses chain conveyor feeding, which can achieve smooth feeding and greatly improve production capacity. Depending on the configuration of the equipment, the wood crusher can process 10 to 15 tons of raw materials per hour.

Environmental protection: Compared with traditional wood crushers, the wood crusher uses less glue in the production process, and its finished product has low formaldehyde emission, which meets environmental protection standards and is suitable for environmental protection projects such as biomass power generation.

Durability and low maintenance cost: The design of the wood crusher takes into account the service life of vulnerable parts, and adopts thickened screen and special hammer manufacturing process, which greatly enhances the durability of the equipment and reduces maintenance and replacement costs.

Easy operation: The operation mode of the equipment is flexible and can be adjusted according to user needs. It usually only requires one person to operate, which reduces labor costs and labor intensity.

High level of automation: Modern wood crushers are equipped with an intelligent feeding system that can automatically adjust the feeding speed according to the load of the main motor to ensure that the machine runs at full load and avoids no-load operation.

Conveyor belt upgrade: Upgrading from the original rubber conveyor belt to a steel conveyor belt can withstand heavier loads and higher wear.

The material of the comprehensive crusher enters from the upper mouth and falls into the crushing chamber for crushing. It is squeezed and hit by the high-speed rotating plate hammer and double sticks, and is quickly thrown to the impact plate. After the material hits, it rebounds to the hammer plate and will be squeezed and crushed again. After such high-frequency impact and counterattack, the material is gradually crushed from large to small. The smaller material falls into the lower crushing chamber and is crushed by the high-speed rotating hammer head. The upper crushing process is repeated.

The hammer head and the impact plate apply shear stress to part of the material for milling, which will accelerate the fine crushing of the material. At the same time, the hammer head drives the material to produce material flow, and a great grinding effect is generated between the materials, which will further crush the material until it is crushed into the required particle size.

1. Waste wood processing:
Wood with nails, wooden pallets, waste formwork on construction sites, wooden brackets, tree stumps, waste furniture, branches, wood, formwork waste, house demolition waste, doors and windows, etc. can be processed. After crushing, these materials can be effectively recycled to reduce resource waste.

2. Biomass power generation:
Crushed wood and other biomass materials are widely used in biomass power plants and burned as fuel to provide renewable energy. These materials can be used as raw materials for coarse crushing and are suitable for the production process of biomass power generation.

3. Biomass pellets and machine-made charcoal production:
The crushed materials can also be used as primary raw materials for biomass pellets, artificial boards, machine-made charcoal and organic fertilizers. These products are widely in demand in the market, especially in terms of environmental protection and sustainable development.

4. Landscaping:
Wood comprehensive crushers are also used in landscaping work, which can process garden waste and provide materials suitable for gardening and greening. This type of equipment usually does not require foundation operation and can be operated as soon as it is put on the ground, which is convenient and flexible.