Application fields of disc wood chipper

Disc wood chipper is mainly used to cut logs, small-diameter wood, board skin, branches and other wood materials into wood chips of certain specifications. These wood chips can be used as raw materials for the production of fiberboard, particleboard, medium-density fiberboard, pulp and other products, and can also be used as fuel. Disc wood chipper has been widely used in papermaking, pulping, wood-based panels and other industries due to its high efficiency, economical and practical characteristics.

The cutting principle of the wood chipper is to use a high-speed rotating knife disc to cut the wood. When the wood raw material enters the cutting chamber through the feed port, the blades on the knife disc will cut it into wood chips. These wood chips are then sent out under the action of the high-speed airflow generated by the fan blades on the knife disc. By adjusting the position and angle of the blade, wood chips of different specifications and thicknesses can be produced to meet different production needs.

Application of disc chipper in papermaking industry

Disc chipper plays a vital role in the papermaking industry. The raw material for papermaking is mainly wood fiber. The disc chipper can cut logs, small-diameter wood, branches and other raw materials into wood chips that meet the requirements of papermaking. It is widely used in the material preparation section of various paper mills. Whether it is a large papermaking enterprise or a small papermaking workshop, as long as it involves papermaking production with wood as raw material, the disc chipper is an indispensable equipment.

The disc chipper has a high pass rate of wood chips and low energy consumption per unit of wood chip output, which helps to improve the production efficiency of paper mills and reduce production costs. In addition, some paper mills may have special requirements for the specifications of wood chips. The disc chipper can adjust the specifications of the output wood chips within a certain range as needed to meet the needs of different papermaking processes.

Application of disc chipper in the manufacture of artificial boards

In the field of manufacturing artificial boards (such as particleboards, medium-density fiberboards, etc.), disc chippers are also important material preparation equipment. Disc chippers can cut logs, wood scraps, branches, etc. into suitable wood chips. Disc chippers can process a variety of wood raw materials, such as logs such as pine, miscellaneous wood, poplar, fir, and wood processing residues such as board skin and veneer.

It can adapt to the processing needs of different types of wood raw materials, allowing wood-based panel manufacturers to use a wider range of raw material sources, thereby reducing production costs and improving production efficiency. Moreover, the disc chipper has a compact and reasonable structure, simple operation, and large production capacity. It is suitable for the large-scale production needs of wood-based panel manufacturers and can provide a stable supply of wood chips for the preparation section of wood-based panel production.

Application of disc chippers in the field of biomass energy

With the increasing demand for renewable energy, the development and utilization of biomass energy has received widespread attention. Disc chippers can cut wood harvesting and processing residues (such as branches, twigs, log cores, waste veneers, etc.), as well as some non-wood raw materials (such as sugarcane, reeds, bamboo, etc.) into wood chips.

After being crushed, these wood chips can be processed into biomass pellet fuel for use in power plants. The use of biomass fuel not only solves the problem of environmental pollution caused by wood processing and agricultural and forestry waste, but also reduces corporate costs, which is of great significance to the sustainable use of resources.

Application of disc chippers in wood processing enterprises

In wood processing enterprises, disc chippers can not only process logs, but also reprocess scraps and residues generated during wood processing. If scraps are discarded directly, it will waste resources and increase environmental pressure. Disc chippers can cut these scraps into wood chips, which can be used for internal energy supply (such as fuel for boiler rooms) or sold to other companies that need wood chip raw materials (such as paper mills, artificial board factories, etc.).

For some wood processing companies that need to perform preliminary processing on logs, disc chippers can cut logs into suitable wood chips for further processing into other wood products or as raw materials for other industrial production.